Electronic breaker PE-2

  • Product Code: 00000001636
  • Availability: In Stock

145.00 ₴

General information

The PE-2 breaker is designed to operate in the direction indicator system for IZh motorcycles and other mopeds and motoblocks operating with an alternator with a rated voltage of 12.0 V.

Unlike thermomechanical turn relays, in PE-2 the interruption frequency does not depend on engine speed, ambient temperature, number of lamps in the load, turning on / off the headlight or signaling devices of the motorcycle. PE-2 does not fail when the P output (control of signal lamps) is closed to ground for up to 10 seconds.

Breaker PE-2 is completely sealed. In terms of the degree of protection against penetration of foreign bodies and water, the product corresponds to the IP65 version in accordance with GOST 14254.

Specifications

Rated supply voltage, V 12
Permissible limits of supply voltage variation, V 6-17,5
Total power of the switched load, no more, W 21
Time before the first switching on of the load, s, no more than 1
Time of switching off the breaker before the first extinguishing of lamps, s, no more than 1,5
The frequency of interruptions of the signal and control lamps at the generator speed from 900 to 8000 rpm, interruptions per minute 90±30
Operating temperature range, °С -10…+50
Weight, kg, no more than 0,03

The PE-2 circuit breaker must be fixed with an M5 screw to the body.

The PE-2 circuit breaker does not require special maintenance during operation.

The manufacturer guarantees trouble-free operation of the breaker under the operating conditions for 24 months from the date of sale.

Connection diagram

1. Interrupter of direction indicators PE-2.
2. Direction indicator switch.
3. Direction indicator lamps.